Polyurethane Dispersion (PUD)
Polyurethane Dispersion (PUD)
Polyurethane Dispersion (PUD)
Can be used for the following:
- Metallic Inks
- Glass Coatings
- Wood Flooring and Cabinets
- Adhesives
- Concrete (2K)
Polymer
Key Benefits
Description
• Film hardness
• Film toughness
• Excellent adhesion
• Exterior durability
• Abrasion resistance
Essential R4100 is an aliphatic polyurethane dispersion that is designed for topcoat applications where flexibility and a high degree of hardness are required.
WARNING: Reproductive Harm – www.P65Warnings.ca.gov.
• Abrasion resistance
• Film toughness
• Excellent adhesion
• Exterior durability
R4188 is a high solids polyurethane dispersion designed to impart superior abrasion resistance and a combination of film harness, flexibility, and toughness which makes it an ideal PUD for topcoat applications.
WARNING: Reproductive Harm – www.P65Warnings.ca.gov.
• Inkjet binder
• Improves highlighter smear
• Long-term jettability
• Wet and dry rub resistance
R4200 improves the performance of inkjet inks for piezo printers. A loading of 4-6% in conjunction with water-based pigments will improve the inkjet ink’s durability, resistance to highlighter smear and wet and dry rub resistance.
• Laminating adhesive
• Excellent adhesion to mylar/PVC
• Block resistance
• Low temperature flexibility
R4242 can be formulated into a laminating adhesive which is specifically designed to be block resistant up to 70°C and maintain its flexibility and toughness below 0°C. It has a low activation temperature of 140°C. It also exhibits crystal clear clarity with peel strength of up to 10N/cm.
WARNING: Reproductive Harm – www.P65Warnings.ca.gov.
• Laminating adhesive
• n-MP-free version
• Excellent adhesion to mylar/PVC
• Block resistance
• Low temperature flexibility
R4243 is an n-MP-free version of R4242 that exhibits all the same properties as a laminating adhesive. It is block resistant up to 70°C and maintains its flexibility and toughness below 0°C. It has a low activation temperature of 140°C. It also exhibits crystal clear clarity with peel strength of up to 10N/cm.
• Melamine baked systems
• Non-yellowing
• Mar and scratch resistance
R4270 is an aliphatic, polyester polyurethane dispersion that was developed for melamine cured systems that will not yellow during the bake cycle. When properly cross-linked, the coatings will exhibit excellent hardness, scratch and mar resistance properties.
WARNING: Reproductive Harm – www.P65Warnings.ca.gov.
• n-MP-free
• Excellent adhesion
to flexible PVC
• Block resistance
• Low temperature flexibility
R4296 is an n-MP-free, highly crystalline waterborne aliphatic polyurethane dispersion used for heat-activated adhesives. R4296 can be used in a single-component, heat cured system or as part of a 2-K system.
• 2-K system
• Hydroxyl-functional
• Chemical resistance
• < 0.1 per rating
• Solvent-free
R4511 is an aliphatic triethanolamine neutralized hydroxyl-functional polyurethane dispersion that will produce low VOC 2-K coatings when cross-linked with a water dispersible polyisocyanate. The 2-K coating formulated with R4511 can be classified as a vapor barrier because of its extremely low perm rating. It is designed for topcoat applications for concrete, wood, metal and plastics.
• Silicone-modified PUD
• n-MP-free
• Lower coefficient of friction
• Mar and scratch resistance
R4584 is a silicone-modified polyurethane dispersion for use where coatings require outstanding mar and scratch resistance properties and a lower coefficient of friction is seen as a benefit. R4584 will impart water-beading/sheeting properties to your coatings as low as 7.5% based on resin solids. R4584 can be blended with acrylic polymers to create coatings for wood, metal and plastics.
- Film hardness
- Film toughness
- Excellent adhesion
- Exterior durability
- Abrasion resistance
WARNING: Reproductive Harm – www.P65Warnings.ca.gov.- Abrasion resistance
- Film toughness
- Excellent adhesion
- Exterior durability
R4188 is a high solids polyurethane dispersion designed to impart superior abrasion resistance and a combination of film harness, flexibility, and toughness which makes it an ideal PUD for topcoat applications.
WARNING: Reproductive Harm – www.P65Warnings.ca.gov.- Inkjet binder
- Improves highlighter smear
- Long-term jettability
- Wet and dry rub resistance
R4200 improves the performance of inkjet inks for piezo printers. A loading of 4-6% in conjunction with water-based pigments will improve the inkjet ink’s durability, resistance to highlighter smear and wet and dry rub resistance.
- Laminating adhesive
- Low temperature flexibility
- Excellent adhesion to mylar/PVC
- Block resistance
R4242 can be formulated into a laminating adhesive which is specifically designed to be block resistant up to 70°C and maintain its flexibility and toughness below 0°C. It has a low activation temperature of 140°C. It also exhibits crystal clear clarity with peel strength of up to 10N/cm.
WARNING: Reproductive Harm – www.P65Warnings.ca.gov.
- Laminating adhesive
- n-MP-free version
- Block resistance
- Excellent adhesion to mylar/PVC
- Low temperature flexibility
R4243 is an n-MP-free version of R4242 that exhibits all the same properties as a laminating adhesive. It is block resistant up to 70°C and maintains its flexibility and toughness below 0°C. It has a low activation temperature of 140°C. It also exhibits crystal clear clarity with peel strength of up to 10N/cm.
- Melamine baked systems
- Non-yellowing
Mar and scratch resistance
R4270 is an aliphatic, polyester polyurethane dispersion that was developed for melamine cured systems that will not yellow during the bake cycle. When properly cross-linked, the coatings will exhibit excellent hardness, scratch and mar resistance properties.
WARNING: Reproductive Harm – www.P65Warnings.ca.gov.
- n-MP-free
- Excellent adhesion
to flexible PVC
- Block resistance
- Low temperature flexibility
R4296 is an n-MP-free, highly crystalline waterborne aliphatic polyurethane dispersion used for heat-activated adhesives. R4296 can be used in a single-component, heat cured system or as part of a 2-K system.
- 2-K system
- Hydroxyl-functiona
- Solvent-free
- < 0.1 per rating
- Chemical resistance
R4511 is an aliphatic triethanolamine neutralized hydroxyl-functional polyurethane dispersion that will produce low VOC 2-K coatings when cross-linked with a water dispersible polyisocyanate. The 2-K coating formulated with R4511 can be classified as a vapor barrier because of its extremely low perm rating. It is designed for topcoat applications for concrete, wood, metal and plastics.
- Silicone-modified PUD
- n-MP-free
- Lower coefficient of friction
- Mar and scratch resistance
R4584 is a silicone-modified polyurethane dispersion for use where coatings require outstanding mar and scratch resistance properties and a lower coefficient of friction is seen as a benefit. R4584 will impart water-beading/sheeting properties to your coatings as low as 7.5% based on resin solids. R4584 can be blended with acrylic polymers to create coatings for wood, metal and plastics.